Poe-Profile - H3C S3100 Series Command Manual

[Sysname] display poe-profile name profile-test
Poe-profile: profile-test, 3 action
poe enable
poe max-power 5000
poe priority critical

poe-profile

Syntax
poe-profile profile-name
undo poe-profile profile-name
View
System view
Parameter
profile-name: Name of PoE profile, a string with 1 to 15 characters. It starts with a letter from a to z or
from A to Z, and it cannot be any of reserved keywords like all, interface, user, undo, and mode.
Description
Use the poe-profile command to create a PoE profile and then enter PoE profile view. If the PoE profile
is already created, you will enter PoE profile view directly.
Use the undo poe-profile command to delete an existing PoE profile.
The following PoE features can be configured in the PoE profile mode:
poe enable
poe mode { signal | spare }
poe priority { critical | high | low }
poe max-power max-power
The maximum number of PoE profiles that can be configured for an S3100 switch is 100.
Example
# Create a PoE profile by the name of profile-test.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] poe-profile profile-test
2-3