H3C S3100 Series Command Manual page 1096

Field
VLAN name of VLAN 1
Auto-negotiation supported
Auto-negotiation enabled
OperMau
PoE supported
Power port class
PSE power supported
PSE power enabled
PSE pairs control ability
Power pairs
Port power classification
Link aggregation supported
Link aggregation enabled
Aggregation port ID
Maximum frame Size
MED information
Media policy type
Unknown Policy
VLAN tagged
Media Policy VlanID
Media Policy L2 priority
Media Policy Dscp
Name of VLAN 1
Indicates whether auto-negotiation is supported on the
port.
State of auto-negotiation
Current speed and duplex state of the port
Indicates whether PoE is supported on the port.
PoE device type, which can be :
PSE: power sourcing equipment
PD: powered device
Indicates whether or not the device can operate as a PSE.
Indicates whether or not the device is operating as a PSE.
Indicates whether or not the PSE-PD pair control is
available.
PoE mode, which can be
.
(PoE via spare lines)
Port power classification of the PD, which can be:
Class0
Class1
Class2
Class3
Class4
Indicates whether or not link aggregation is supported.
Indicates whether or not link aggregation is enabled.
Aggregation group ID, which is 0 if link aggregation is not
enabled.
Maximum frame size supported
MED LLDP information
Media policy type, which can be:
unknown
voice
voiceSignaling
guestVoice
guestVoiceSignaling
softPhoneVoice
videoconferencing
streamingVideo
videoSignaling
Indicates whether or not the media policy is unknown.
Indicates whether packets of the media VLAN are tagged.
ID of the media VLAN
Layer 2 priority
DSCP precedence
1-4
Description
Signal (PoE via signal lines) or Spare