Display Cfd Mep - H3C S3100 Series Command Manual

Level: 6
Level: 7
Table 1-7 display cfd md command output description
8 maintenance domain(s) configured
Level
Maintenance domain

display cfd mep

Syntax
display cfd mep mep-id service-instance instance-id
View
Any view
Default Level
2: System level
Parameters
mep mep-id: Specifies a MEP by its ID, ranging from 1 to 8191.
service-instance instance-id: Specifies a service instance by its ID, ranging from 1 to 32767.
Description
Use the display cfd mep command to display the attribute and operating information of a MEP or
multiple MEPs.
Examples
# Display the attribute and operating information of MEP 50 in service instance 1.
<Sysname> display cfd mep 50 service-instance 1
Interface: Ethernet1/0/2
Maintenance domain: mdtest_1
Maintenance association: matest_1
Level: 1
Administrative state: Active
FNG state: FNG_DEFECT_REPORTED
CCM:
Current state: CCI_WAITING
Interval: 1s
Loopback:
NextSeqNumber: 8877
SendLBR: 0
Linktrace:
NextSeqNumber: 8877
SendLTR: 0
Maintenance domain: mdtest_6
Maintenance domain: mdtest_7
Field
VLAN: 1 Direction: Outbound
SendCCM: 12018
ReceiveInOrderLBR: 0
ReceiveLTM: 0
Number of MDs configured
Level of MD, each level allows only one MD.
Name of MD
CCM send: Enable
ReceiveOutOrderLBR: 0
1-19
Description