Mac-Authentication Timer Offline-Detect - H3C S3100 Series Command Manual

Parameters
offline-detect-value: Offline detect timer, which specifies the idle timeout interval (in seconds) for users.
At this interval, the switch checks whether there is traffic from each user. If receiving no traffic from a
user within two consecutive intervals, the switch logs the user out and notifies the RADIUS server. The
value range for the offline-detect-value argument is 0 to 3000000. The default is 300 seconds. If the
offline-detect-value argument takes the value of 0, the offline detect timer is disabled.
quiet-value: Quiet timer (in seconds) setting. This argument ranges from 1 to 3,600 and defaults to 60.
After a user fails to pass the authentication performed by a switch, the switch quiets for a specific period
(the quiet period) before it authenticates the user again.
server-timeout-value: Server timeout timer setting (in seconds). This argument ranges from 1 to 65,535
and defaults to 100. During authentication, the switch prohibits a user from accessing the network if the
connection between the switch and the RADIUS server times out.
Description
Use the mac-authentication timer command to configure the timers used in MAC address
authentication.
Use the undo mac-authentication timer command to restore a timer to its default setting.
Related commands: display mac-authentication.
Examples
# Set the server timeout timer to 150 seconds.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] mac-authentication timer server-timeout 150

mac-authentication timer offline-detect

Syntax
mac-authentication timer offline-detect offline-detect-value
undo mac-authentication timer offline-detect
View
System view, Ethernet port view
Parameters
offline-detect-value: Offline detect timer, which specifies the idle timeout interval (in seconds) for users.
At this interval, the switch checks whether there is traffic from each user. If receiving no traffic from a
user within two consecutive intervals, the switch logs the user out and notifies the RADIUS server. The
value range for the offline-detect-value argument is 0 to 3000000. The default is 300 seconds.
Description
Use the mac-authentication timer offline-detect command to set the offline detect timer for MAC
authentication.
Use the undo mac-authentication timer offline-detect command to restore the default.
Note that:
1-9