Display Oam Configuration - H3C S3100 Series Command Manual

Table 1-2 display oam remote interface command output description
Field
Port
Link Status
Information of the latest received
OAM packet
OAMRemoteMACAddress
OAMRemotePDUConfiguration
OAMRemoteState
Remote_mux_action
Remote_par_action
OAMRemoteConfiguration
OAM Mode
Unidirectional Support
Loopback Support
Link Events
Variable Retrieval
OAMRemoteFlagsField
Link Fault
Dying Gasp
Critical Event
Local Evaluating
Remote Evaluating

display oam configuration

Syntax
display oam configuration
View
Any view
Default Level
2: System level
Port index
Link status
Information about the latest received Ethernet OAMPDU
MAC address of the Ethernet OAM peer
Maximum Ethernet OAMPDU size allowed
State of the Ethernet OAM peer
Peer sending mode. Refer to
Peer receiving mode. Refer to
Configuration of the peer Ethernet OAM entity
Ethernet OAM mode
Indicates whether unidirectional transmission is supported (YES or NO)
Indicates whether Ethernet OAM remote loopback is supported (YES or
NO)
Indicates whether Ethernet OAM link error events are supported (YES or
NO)
Indicates whether MIB variable retrieval is supported (YES or NO)
Values of the peer Ethernet OAM flag fields in OAM packets
Indicates whether a link fault is present: 0 for no and 1 for yes.
Indicate whether a fatal fault is present: 0 for no and 1 for yes.
Indicate whether a critical fault is present: 0 for no and 1 for yes.
Indicates whether the local-to-remote configuration negotiation is
complete:
COMPLETE for completed
REVERSED for uncompleted
Indicates whether the remote-to-local configuration negotiation is
complete:
COMPLETE for completed
REVERSED for uncompleted
1-4
Description
Table 1-1 for more.
Table 1-1 for more.