H3C S3100 Series Command Manual page 1195

No CCM from some remote MEPs is received.
One or more streams of error CCMs is received. The last-received CCM:
Maintenance domain:mdtest1
Maintenance association:matest1
MEP:5 Sequence Number:0x50A
Received Time: 02/3/6 13:01:34
One or more streams of cross-connect CCMs is received. The last-received CCM:
Maintenance domain:mdtest1
Maintenance association:matest1
MEP:6 Sequence Number:0x63A
Received Time: 02/3/6 13:01:34
Some other MEPs are transmitting the RDI bit.
Table 1-8 display cfd mep command output description
Field
Interface
Maintenance domain
Maintenance association
Level
VLAN
Direction
Administrative state
CCM send
FNG state
CCM
Current state
Interval
SendCCM
Loopback
NextSeqNumber
SendLBR
ReceiveInOrderLBR
ReceiveOutOrderLBR
Linktrace
Interface that an MD belongs to
MD that a MEP belongs to
MA that a MEP belongs to
Level of the MD
VLAN that the MA belongs to
Direction of the MEPs
State of MEP, either Active or Inactive
Whether the MEP sends CCM
State of FNG (Fault Notification Generator), which can be: FNG_RESET
FNG_DEFECT
FNG_REPORT_DEFECT,
FNG_DEFECT_REPORTED
FNG_DEFECT_CLEARING
Information related to CCM
State of CCMs sent, which can be:
CCI_IDLE
CCI_WAITING
Interval to send CCM
Number of CCMs that have been sent by the MEPs
Information related to Loopback
Sequence number of the next LBM to be sent
Number of LBRs that have been sent. If the MEP is inward-facing, the number
of LBRs will not be counted.
Number of LBR messages received in correct sequence
Number of LBR messages received out of order
Information related to linktrace
1-20
Description