Cfd Service-Instance - H3C S3100 Series Command Manual

Default Level
2: System level
Parameters
service-instance instance-id: Specifies the service instance ID, ranging from 1 to 32767.
explicit: This rule means that if the lower level MA is not configured with MIPs, whether the current MA
will create MIPs depends on whether the lower level MA is configured with MEPs.
default: This rule means that if the lower level MA is not configured with MIPs, the current MA will create
MIPs.
Description
Use the cfd mip-rule command to configure the rules for generating MIPs. MIPs are generated on each
port automatically according to the rules configured.
Use the undo cfd mip-rule command to delete the rule for generating MIPs.
By default, no rules for generating MIPs are configured and no MIPs exist.
Examples
# Configure the MIP generation rule as default in service instance 5.
<Sysname> system-view
[Sysname] cfd mip-rule default service-instance 5

cfd service-instance

Syntax
cfd service-instance instance-id md md-name ma ma-name
undo cfd service-instance instance-id
View
System view
Default Level
2: System level
Parameters
service-instance instance-id: Specifies a service instance by its ID, which ranges from 1 to 32767.
md md-name: Specifies the name of an MD, a string of 1 to 43 characters, composed of letters,
numbers or underlines, but cannot start with an underline character.
ma ma-name: Specifies the name of an MA, a string of 1 to 43 characters, composed of letters,
numbers or underlines, but cannot start with an underline character.
Description
Use the cfd service-instance command to create a service instance.
Use the undo cfd service-instance command to delete a service instance.
By default, no service instance is created.
Note that:
You must create MD and MA prior to creating service instance.
The service instance ID uniquely identifies an MA in an MD.
1-11