Ip Dhcp Pool - Dell PowerConnect W-7200 Series Reference Manual

ip dhcp pool

ip dhcp pool <name>
default-router <ipaddr> ...
dns-server {<ipaddr> ... |import}
domain-name <name>
lease <days> <hours> <minutes>
netbios-name-server {<ipaddr> ... |import}
network <ipaddr> {<netmask>|<prefix>}
no ...
option <code> ip <ipaddr>
pooltype ipupsell|private|public
vendor-class-identifier
Description
This command configures a DHCP pool on the controller.
Syntax
Parameter
default-router
dns-server
<address>
import
domain-name
lease
netbios-name-
server
<address>
import
network
no
option
pooltype
vendor-class-
identifier
360 | ip dhcp pool
Description
IP address of the default router for the DHCP client. The client should be on the same
subnetwork as the default router. You can specify up to eight IP addresses.
IP address of the DNS server, which can be one of the following:
IP address of the DNS server. You can specify up to eight IP addresses.
Use the DNS server address obtained through PPPoE or DHCP.
Domain name to which the client belongs.
The amount of time that the assigned IP address is valid for the client. Specify the lease in
<days> <hours> <minutes>.
IP address of the NetBIOS Windows Internet Naming Service (WINS) server, which can be
one of the following:
IP address of the WINS server. You can specify up to eight IP addresses.
Use the NetBIOS name server address obtained through PPPoE or DHCP.
Range of addresses that the DHCP server may assign to clients, in the form of <ipaddr> and
<netmask> or <ipaddr> and <prefix> (/n).
Negates any configured parameter.
Client-specific option code and IP address. See RFC 2132, "DHCP Options and BOOTP
Vendor Extensions".
Configure one of the following DHCP Pool types
ipupsell: Configure the DHCP pool as an IP upsell pool
l
private: Configure the DHCP pool as private
l
public: Configure the DHCP pool as public
l
Send the ArubaAP vendor ID to clients.
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide