Command: Ip Default-Gateway; Ip Default-Gateway Command; Command: Login; Login Command - Dell PowerConnect 2816 User Manual

Parameters range
ip-address
• — Valid IP address in the form A.B.C.D.

Command: ip default-gateway

To define a default gateway (router), use the ip default-gateway global configuration command. To
remove the default gateway use the no form of this command.
ip-address
ip default-gateway
no ip default-gateway
Syntax Description
ip-address
— IP address of the default gateway.
Parameters range
ip-address
— Valid IP address
Defaults
No default gateway is defined.
Command Modes
Global configuration
Interface configuration

Command: login

To change a login username, use the login command in EXEC mode.
login
Syntax Description
This command has no arguments or keywords.
Command Mode
EXEC

Command: ping

Use the ping command to send ICMP echo request packets to another node on the network.
ip-address hostname
ping {
|
Syntax Description
ip-address
• — IP address to ping.
packet_size
} [size ] [count
packet_count
] [timeout
Dell PowerConnect 28xx Systems User Guide
time_out
]
167