Table of Contents
Advertisement
•
acl-name — A valid ARP ACL name (Range: 1–31 characters).
Default Configuration
There are no ARP ACLs created by default.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#arp access-list tier1
clear ip arp inspection statistics
Use the clear ip arp inspection statistics command to reset the statistics for
Dynamic Address Resolution Protocol (ARP) inspection on all VLANs.
Syntax
clear ip arp inspection statistics
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode
User Guidelines
There are no user guidelines for this command.
Example
console#clear ip arp inspection statistics
372
Layer 2 Switching Commands
Advertisement
Table of Contents
