show lldp local
To display the Link Layer Discovery Protocol (LLDP) information that is advertised from a specific
port, use the show lldp local command in privileged EXEC mode.
Syntax
show lldp local [ethernet interface]
•
Interface — Ethernet port
Command Modes
Privileged EXEC
User Guidelines
•
There are no user guidelines for this command.
Example
The following example displays the Link Layer Discovery Protocol (LLDP) information that is
advertised from a specific port.
Switch# show lldp local ethernet g1
Device ID: 0060.704C.73FF
Port ID: 1
Capabilities: Bridge
System Name: ts-7800-1
System description:
Port description:
Management address: 172.16.1.8
show lldp neighbors
To display information about neighboring devices discovered using Link Layer Discovery Protocol
(LLDP), use the show lldp neighbors command in privileged EXEC mode.
Syntax
show lldp neighbors [ethernet interface]
•
Interface — Ethernet port
Command Modes
Privileged EXEC
166
LLDP Commands