Address Table Commands - Dell PowerConnect 5424 Command Line Interface Manual

password
enable password
username
show users accounts

Address Table Commands

Command Group
bridge address
bridge multicast filtering
bridge multicast address
bridge multicast forbidden
address
bridge multicast
unregistered
bridge multicast forward-all Enables forwarding of all Multicast frames on a port.
bridge multicast forbidden
forward-all
bridge aging-time
clear bridge
port security
port security routed secure-
address
show bridge address-table
show bridge address-table
static
36
Command Groups
Specifies a password on a line.
Sets a local password to control access to normal and
privilege levels.
Establishes a username-based authentication system.
Displays information about the local user database.
Description
Adds a static MAC-layer station source address to the
bridge table.
Enables filtering of Multicast addresses.
Registers MAC-layer Multicast addresses to the bridge
table, and adds static ports to the group.
Forbids adding a specific Multicast address to specific
ports.
Configures the forwarding state of unregistered multicast
addresses.
Enables forbidding forwarding of all Multicast frames to
a port.
Sets the address table aging time.
Removes any learned entries from the forwarding
database.
Disables new address learning on an interface.
Adds MAC-layer secure addresses to a routed port.
Displays dynamically created entries in the
bridge-forwarding database.
Displays statically created entries in the
bridge-forwarding database
.
Line Configuration
Global
Configuration
Global
Configuration
Privileged User
EXEC
Access Mode
VLAN
Configuration
Global
Configuration
VLAN
Configuration
VLAN
Configuration
Interface
Configuration
VLAN
Configuration
VLAN
Configuration
Global
Configuration
Privileged User
EXEC
Interface
Configuration
Interface
Configuration
Privileged User
EXEC
Privileged User
EXEC