Show Crypto Key Pubkey-Chain Ssh - Dell Networking 7048 Reference Manual

show crypto key pubkey-chain ssh

Use the show crypto key pubkey-chain ssh command in Privileged EXEC
mode to display SSH public keys stored on the switch.
Syntax
show crypto key pubkey-chain ssh [username
babble | hex]
username — Specifies the remote SSH client username. (Range: 1–48
•
characters)
• bubble-babble — Fingerprints in Bubble Babble format.
• hex — Fingerprint in Hex format. If fingerprint is unspecified, it defaults
to Hex format.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays all SSH public keys stored on the switch.
console#show crypto key pubkey-chain ssh
Username Fingerprint
-------- -------------------------------------------------
bob 9A:CC:01:C5:78:39:27:86:79:CC:23:C5:98:59:F1:86
john 98:F7:6E:28:F2:79:87:C8:18:F8:88:CC:F8:89:87:C8
The following example displays the SSH public called "dana."
console#show crypto key pubkey-chain ssh username dana
Username: dana
rsa key data:
username
] [fingerprint bubble-
SSH Commands
1615