Table of Contents
Advertisement
Configuring the Remote Log Server Settings Page
The Remote Log Server Settings page contains fields for viewing and configuring the available Log
Servers. In addition, new log servers can be defined, and the log severity sent to each sever. To open the
Remote Log Server Settings page, click System
Figure 6-19. Remote Log Server Settings
•
Available Servers — Contains a list of servers to which logs can be sent.
•
UDP Port (1-65535) — The UDP port to which the logs are sent for the selected server. The possible
range is 1 - 65535. The default value is 514.
•
Facility — Defines a user-defined application from which system logs are sent to the remote server. Only
one facility can be assigned to a single server. If a second facility level is assigned, the first facility level is
overridden. All applications defined for a device utilize the same facility on a server. The possible field
values are: Local 0-Local 7.
•
Description (0-64 Characters) — The user-defined server description.
100
Configuring System Information
→
Logs
→
Remote Log Server in the tree view.
Advertisement
Table of Contents
