Example
The following example specifies the asset tag of the master unit as "1qwepot".
Console(config)# asset-tag 1qwepot
show system id
The show system id User EXEC mode command displays system ID information.
Syntax
•
show system id [unit unit]
•
unit — Specifies the number of the unit. (Range: 1 - 6)
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example displays system service and asset tag information.
Console> show system id
Service Tag: 89788978
Serial number: 8936589782
Asset tag: 7843678957
Unit
Service tag
----
-----------
1
89788978
2
34254675
Serial number
------------
893659782
3216523877
Asset tag
---------
7843678957
5621987728
System Management
433