T320 Core Router Hardware Guide
Related
Documentation
T320 Connector Interface Panel (CIP) Description
16
Data path—Data packets are transferred across the midplane from the Packet
Forwarding Engine on the originating FPC to the SIBs, and from the SIBs across the
midplane to the Packet Forwarding Engine on the destination FPC.
Power distribution—The router power supplies are connected to the midplane, which
distributes power to all the router components.
Signal path—The midplane provides the signal path to the FPCs, SIBs, Routing Engines,
control boards, and other system components for monitoring and control of the system.
Figure 6: T320 Midplane
For chassis serial number information , see
Using the CLI" on page
311.
T320 Router Description on page 3
T320 Physical Specifications on page 92
The Connector Interface Panel (CIP) consists of Ethernet, console, and auxiliary
connectors for the Routing Engines and alarm relay contacts (see
The front electrostatic discharge point is located near the bottom of the CIP. The CIP is
located at the left side of the FPC card cage.
"Locating T320 Component Serial Numbers
Figure 7 on page
Copyright © 2018, Juniper Networks, Inc.
17).