Show Chassis Fpc Optical-Properties Alarms; Table 15: Alarm Descriptions - Juniper PTX3000 IPLC Features Manual

show chassis fpc optical-properties alarms

Syntax
Release Information
Description
Options
Additional Information

Table 15: Alarm Descriptions

Alarm
IPLC fpc-slot AWG Add LOS
IPLC fpc-slot Express-In LOS
IPLC fpc-slot OSC Add LOS
IPLC fpc-slot OSC Drop LOS
IPLC fpc-slot Line In LOS
IPLC fpc-slot Reflect Power Failure
IPLC fpc-slot Out of Gain
IPLC fpc-slot Pump EOL
IPLC fpc-slot Temperature Failure
IPLC fpc-slot Output LOS
IPLC fpc-slot Input LOS
Copyright © 2018, Juniper Networks, Inc.
show chassis fpc optical-properties alarms fpc-slot fpc-slot
Statement introduced in Junos OS Release 15.1F6 and 17.1R1 on PTX3000 integrated
photonic line system.
Display the alarms for the integrated photonic line card (IPLC) module installed in the
Flexible PIC Concentrator (FPC) or PIC slot. Use this command to view the current alarms
on the IPLC.
fpc-slot—Slot number of the FPC or PIC in which the IPLC module resides.
The alarms provide information about system or component failures on the IPLC.
NOTE: The fpc-slot number in the alarms refers to the FPC or PIC in which
the IPLC module resides.
Description
The IPLC AWG Add port has detected loss of signal (LOS).
The IPLC Express-In (XPN-IN) port has detected LOS.
The IPLC OSC Add port has detected LOS.
The IPLC OSC Drop port has detected LOS.
The IPLC Line IN port has detected LOS.
The IPLC has detected back reflection power failure.
The IPLC could not converge on the set gain. It is operating at a gain value
exceeding the allowable deviation from the set gain.
The IPLC pump has reached its end of life (i.e. Pump current has reached
the maximum rated value).
The IPLC EDFA has detected temperature failure.
The IPLC EDFA Output port has detected LOS.
The IPLC EDFA Input port has detected LOS.
Chapter 12: Operational Commands
119