Alarm And Display Components; Mx2010 Craft Interface Description - Juniper MX2010 Hardware Manual

CHAPTER 3

Alarm and Display Components

IN THIS CHAPTER

MX2010 Craft Interface Description | 29

MX2010 Component LEDs on the Craft Interface | 31
MX2010 Alarm Relay Contacts on the Craft Interface | 34
MX2010 Alarm LEDs and Alarm Cutoff/Lamp Test Button | 35
MX2010 Craft Interface Description
The craft interface enables the user to view status and troubleshooting information at a glance and to
perform many system control functions. It is hot-insertable and hot-removable.
The craft interface is located on the front of the router above the upper fan tray and contains LEDs for
the router components, the alarm relay contacts, and alarm cutoff button (see
Table 10 on page 30 describes the LEDs, buttons, and connectors.
Figure 9: Front Panel of the Craft Interface
1
2 3 4 5
Figure 9 on page
6 8
7
10
11
29
29).
9