Table 8: Routing Engines Displaying Dimm Information - Juniper EX9200 Features Manual

Port Mirroring Feature Guide for EX9200 Switches
Additional Information

Table 8: Routing Engines Displaying DIMM Information

Routing Engines
RE-S-1800x2 and RE-S-1800x4
RE-A-1800x2
204
Replace number with the following values depending on the LCC configuration:
0 through 3, when T640 routers are connected to a TX Matrix router in a routing
matrix.
0 through 3, when T1600 routers are connected to a TX Matrix Plus router in a
routing matrix.
0 through 7, when T1600 routers are connected to a TX Matrix Plus router with 3D
SIBs in a routing matrix.
0, 2, 4, or 6, when T4000 routers are connected to a TX Matrix Plus router with
3D SIBs in a routing matrix.
local —(MX Series routers only) (Optional) Display hardware-specific information for the
local Virtual Chassis members.
—(MX Series routers and EX Series switches) (Optional) Display
member member-id
hardware-specific information for the specified member of the Virtual Chassis
configuration. Replace member-id variable with a value 0 or 1.
—(Optional) Display model numbers and part numbers for orderable FRUs and,
models
for components that use ID EEPROM format v2, the CLEI code.
node-device name —(QFabric systems only) (Optional) Display hardware-specific
information for the Node device.
satellite [slot-id slot-id | device-alias alias-name]
hardware information for the specified satellite device in a Junos Fusion, or for all
satellite devices in the Junos Fusion if no satellite devices are specified.
—(TX Matrix router only) (Optional) Display hardware information for the TX Matrix
scc
router (switch-card chassis).
sfc number —(TX Matrix Plus router only) (Optional) Display hardware information for
the TX Matrix Plus router (switch-fabric chassis). Replace number variable with
The show chassis hardware detail
following Routing Engines, as shown in
In Junos OS Release 11.4 and later, the output for the
operational mode command for MX Series routers display the enhanced midplanes FRU
model numbers—CHAS-BP3-MX240-S, CHAS-BP3-MX480-S, or
CHAS-BP3-MX960-S—based on the router. In releases before Junos OS Release 11.4,
the FRU model numbers are left blank when the router has enhanced midplanes. Note
—(Junos Fusion only) (Optional) Display
command now displays DIMM information for the
Table 8 on page 204.
Routers
MX240, MX480, and MX960 routers
M120 and M320 routers
show chassis hardware models
Copyright © 2016, Juniper Networks, Inc.
.
0