Line Card Components And Descriptions; M7I Flexible Pic Concentrators (Fpcs) Description; Figure 13: Fpc Slot Numbering - Juniper M7i Hardware Manual

CHAPTER 6

Line Card Components and Descriptions

M7i Flexible PIC Concentrators (FPCs) Description

Related
Documentation
Copyright © 2019, Juniper Networks, Inc.
M7i Flexible PIC Concentrators (FPCs) Description on page 43
M7i Fixed Interface Card (FIC) Description on page 44
FIC Specifications for the M7i Router on page 45
M7i FIC LEDs on page 45
M7i PICs Description on page 46
M7i PIC LEDs on page 47
M7i PICs Supported on page 47
M7i End-of-Life PICs Supported on page 50
M7i PIC Combination Limitations on page 53
M7i PIC/CFEB Compatibility on page 53
Flexible PIC Concentrators (FPCs) house the PICs that connect the router to network
media (for information about PICs, see
router, each FPC is built in (it cannot be removed from the chassis as on other M Series
routers). The networking and services interfaces in the M7i router are grouped onto two
logical FPCs by the router, (see
1 the FIC is located in slot 3
is installed on the CFEB or CFEB-E, it is located on slot

Figure 13: FPC Slot Numbering

M7i Router Description on page 3
M7i Router Physical Specifications on page 74
"M7i PICs Description" on page
Figure 13 on page 43). PICs are located on
and the built-in tunnel interface is located in slot
46). On the M7i
. On
FPC 0
2 . If the ASM
with the built-in tunnel interface.
2
FPC
43