Checking Active Alarms With The J-Web Interface - Juniper EX4300 Hardware Manual

EX4300 Switch Hardware Guide
Related
Documentation

Checking Active Alarms with the J-Web Interface

Purpose
274
Table 90: Chassis Component Alarm Conditions on EX4300
Switches (continued)
Chassis Component Alarm Condition
Routing Engine /var
high.
/var
Rescue configuration
is not set.
Feature usage
requires a license or
the license for the
feature usage has
expired.
Field-Replaceable Units in EX4300 Switches on page 26
Chassis Status LEDs on EX4300 Switches on page 36
Understanding Alarm Types and Severity Levels on EX Series Switches on page 269
NOTE: This topic applies only to the J-Web Application package.
Use the monitoring functionality to view alarm information for the EX Series switches
including alarm type, alarm severity, and a brief description for each active alarm on the
switching platform.
Alarm Severity
Minor (yellow)
partition usage is
Major (red)
partition is full.
Minor (yellow)
Minor (yellow)
Remedy
Clean up the system
file storage space on
the switch. For more
information, see
Cleaning Up the
System File Storage
Space.
Clean up the system
file storage space on
the switch. For more
information, see
Cleaning Up the
System File Storage
Space.
Use the
request
system configuration
rescue save command
to set the rescue
configuration. For
more information, see
Setting or Deleting the
Rescue Configuration
(CLI Procedure).
Install the required
license for the feature
specified in the alarm.
For more information,
see Understanding
Software Licenses for
EX Series Switches.
Copyright © 2017, Juniper Networks, Inc.