Switch installation
LED
Table 17: Shared SFP transceiver Port LED state indicators
Label
In Use
LNK/ACT
IP address information configuration
About this task
The following sections contain information necessary to configure IP address parameters on the
switch.
September 2017
State
Amethyst (Solid)
Amethyst (Blinking)
Amethyst / Ruby
(Alternating)
Sapphire / Ruby (Alternating) The fan tray in position 1, 2, 3, or 4 does not
Sapphire (Blink x3) / Ruby
(Solid)
Amethyst (Blink x3) / Ruby
(Solid)
Color / Status
Green / steady
Off
Green / steady
Green / blinking
Green / slow blinking
Off
Installing Avaya ERS 5900 Series
Comments on this document? infodev@avaya.com
Description
The fan tray in position 1, 2, 3, or 4 is back to
front airflow and is operating normally.
The fan tray in position 1, 2, 3, or 4 is back to
front airflow and has degraded. Check for a
fan failure and replace if necessary.
The fan tray in position 1, 2, 3, or 4 does not
match the front to back airflow mode of the
power supply. You must replace the fan tray
with a front to back airflow model.
match the back to front airflow mode of the
power supply. You must replace the fan tray
with a back to front airflow model.
The fan tray in position 1, 2, 3, or 4 has
degraded and does not match the front to
back airflow mode of the power supply. You
must replace the fan tray with a front to back
airflow model.
The fan tray in position 1, 2, 3, or 4 has
degraded and does not match the back to
front airflow mode of the power supply. You
must replace the fan tray with a back to front
airflow model.
Description
The port has a link established.
The port does not have a link established.
This link is operating normally.
There is activity on the port.
The port has been disabled by the software.
Indicates that the link has been lost.
62