Ip Access-List-Name; Ip Access-List-Owner - Avaya P460 Reference Manual

Chapter 2 Avaya P460 CLI Commands
necessary.
Use the ip access-list-copy command to copy a configured source policy list
to a destination policy list.
The syntax for this command is:
ip access-list-copy <source-list> <destination-list>
<source-list>
<destination-list>
Example:
Router-1(configure)# ip access-list-copy 100 101

ip access-list-name

User level: read-write, admin.
• You can only access this command in Configure mode.
Type configure at the command prompt to enter Configure mode if
necessary.
Use the ip access-list-name command to set a name for a policy list.
The syntax for this command is:
ip access-list-name <policy-list-number> <name>
<policy-list-number>
<name>
Example:
Router-1(configure)# ip access-list-name 101 morning
If you wish to define a name which includes spaces, you must enclose the entire
name in quotation marks, for example "new york".

ip access-list-owner

User level: read-write, admin.
• You can only access this command in Configure mode.
Type configure at the command prompt to enter Configure mode if
34
integer (100...199)
integer (100...199)
integer (100...199)
list name
Avaya P460 Reference Guide