Table of Contents
Advertisement
Chapter 5
CLI – Layer 2
192.168.49.10 5
Beginning upload operation ...
This operation may take a few minutes...
Please refrain from any other operation during this time.
For more information , use 'show tftp upload status' command
********************************************************************
* If you are currently running the P330 Device Manager application,*
* it is recommended to exit from it before performing configuration*
* download operations.
********************************************************************
copy tftp stack-config
Use the copy tftp stack-config command to download the stack-level
configuration from a saved file into the current NVRAM running configuration, via
TFTP. To use this command, you need to have an active tftp server, and to create a
file into which to download the data. If CajunView is running, an additional TFTP
server is not required.
Note: You should perform the nvram initialize command prior to the
copy tftp operation.
The syntax for this command is:
copy tftp stack-config <filename> <ip>
filename
ip
Example:
P330-N# copy tftp stack-config c:\config\switch1.cfg
192.168.49.10
128
The file name (full path)
The IP address of the TFTP server
Avaya P333T-PWR User's Guide
*
Advertisement
Table of Contents
