Copy Module-Config Tftp Command; Copy Tftp Stack-Config Command - Avaya P333T User Manual

Chapter 6 Cajun Campus CLI – Layer 2

Copy module-config tftp Command

Use the copy module-config tftp command to upload the module-level
parameters from the current NVRAM running configuration into a file via TFTP.
The syntax for this command is:
copy module-config tftp <filename> <ip> <mod_num>
filename
ip
Example:
Cajun_P330-N# copy module-config tftp c:\p333t\switch1.cfg
192.168.49.10 5
Beginning upload operation ...
This operation may take a few minutes...
Please refrain from any other operation during this time.
For more information , use 'show tftp upload status' command
********************************************************************
* If you are currently running the P330 Device Manager application,*
* it is recommended to exit from it before performing configuration*
* download operations.
********************************************************************

Copy tftp stack-config Command

Use the copy tftp stack-config command to download the stack-level
configuration from a saved file into the current NVRAM running configuration, via
TFTP.
The syntax for this command is:
copy tftp stack-config <filename> <ip>
filename
ip
Example:
Cajun_P330-N# copy tftp stack-config c:\p333t\switch1.cfg
192.168.49.10
110
file name (full path)
The ip address of the host
file name (full path)
The ip address of the host
Avaya P333T User's Guide
*