Copy Tftp L2-Config - Avaya P460 Reference Manual

Chapter 2 Avaya P460 CLI Commands
To use this command, you need to have an active TFTP server, and to create a
file into which to download the data.
If Avaya MultiService Network Manager is running, you do not require an
additional TFTP server..
The syntax for this command is:
copy tftp EW_archive <filename> <ip>
filename
ip
Example:
P460-1# copy tftp EW-archive c:\P460\switch1.cfg
192.168.49.10

copy tftp l2-config

User level: read-write, admin.
Use the copy tftp l2-config command to update the Layer 2 parameters in the
current NVRAM running configuration from a file via TFTP.
To use this command, you need to have an active tftp server, and to create a file
into which to download the data.
If Avaya MultiService Network Manager is running, you do not require an
additional TFTP server.
The syntax for this command is:
copy tftp l2-config <filename> <ip>
filename
ip
24
P460 Manager image file name (full path)
The IP address of the host
file name (including full path)
IP address of the host
Avaya P460 Reference Guide