Set Trunk Command; Clear Vlan Command - Avaya P130 User Manual

Chapter 6 Avaya P130 CLI

Set trunk Command

Use the set trunk command to configure the tagging mode.
The syntax for this command is:
set trunk <mod_num>/<port_num> {off|dot1q}
<mod_num>
<port_num>
off
dot1q
Example:
P130-1# set trunk 1/19 dot1q
Dot1Q VLAN tagging set on port 1/19.
P130-1# set trunk 1/19 off
No VLAN tagging set on port 1/19.

Clear vlan Command

Use the clear vlan command to delete an existing VLAN and return ports from
this VLAN to the default VLAN #1. When you clear a VLAN, all ports assigned to
that VLAN are assigned to the default VLAN #1.
The syntax for this command is:
clear vlan [VLAN_num]
VLAN_num
Example:
This example shows how you can delete an existing VLAN (VLAN 4) from a
management domain:
P130-1# clear vlan 4
This command will assign all ports on VLAN 4 to their default
in the entire management domain
88
Module number
Number of the port on the module
Forces the port to become a non-tagging port. The port is in the
clear (tagging) mode: it will never send frames as tagged, but it
will correctly interpret received tagged frames.
Forces the port to become a 802.1Q tagging port. The port is in
the tagging mode: it will send frames as tagged and will
correctly interpret received untagged frames.
Number of the VLAN (range is 1 to 4079).
Avaya P130 User's Guide