Clear Vlan; Clear Vlan (Layer 3) - Avaya P460 Reference Manual

Chapter 2 Avaya P460 CLI Commands

clear vlan

User level: read-write, admin.
Use the clear vlan command to delete an existing VLAN and return ports from
this VLAN to the default VLAN #1. When you clear a VLAN, all ports assigned to
that VLAN are assigned to the default VLAN #1.
The syntax for this command is:
clear vlan <vlan-id>[name <vlan_name>]
vlan_id
vlan_name
If you wish to enter a name which includes spaces, you must enclose the entire
name in quotation marks, for example "new york".
Example:
P460-1#
This command will assign all ports on vlan 100 to their
default in the entire management domain - do you want to
continue (Y/N)?
VLAN 100 deletion successful

clear vlan (Layer 3)

User level: read-write, admin.
You can only access this command in Configure mode.
Type configure at the command prompt to enter Configure mode if
necessary.
Use the clear vlan command to delete a Router layer 2 interface.
The syntax for this command is:
clear vlan [<ifIndex>] | [name <ifname>]
ifIndex
ifname
Example:
Router-1(configure)# clear vlan 2 name vlan2
22
VLAN number
VLAN name
clear vlan 100
y
Interface Index
Interface name (used in layer 3 protocols)
Avaya P460 Reference Guide