Show Snmp Retries Command; Show Snmp Timeout Command - Avaya P333T User Manual

Chapter 6 Cajun Campus CLI – Layer 2
Example:
Cajun_P330-N> show snmp
Authentication trap disabled
Community-Access
----------------
read-only
read-write
trap
Trap-Rec-Address
----------------
1.1.1.1

Show snmp retries Command

Use the show snmp retries command to display the number of retries initiated
by the Device Manager application when it tries to send SNMP messages to the
device.
The syntax for this command is:
show snmp retries
Example:
Cajun_P330-N> show snmp retries
the SNMP Retries Number is 3

Show snmp timeout Command

Use the show snmp timeout command to display the default SNMP timeout in
seconds. This command is useful for access using the Device Manager.
The syntax for this command is:
show snmp timeout
Example:
Cajun_P330-N> show snmp timeout
the SNMP Timeout is 2000
46
Community-String
----------------
public
public
public
Traps Enabled
----------------
config
fault
etc...
Avaya P333T User's Guide