Ip Proxy-Arp Command; Ip Routing-Mode Command; Ip Redirect Command - Avaya P333R-LB User Manual

Chapter 6 Cajun Campus CLI - Layer 3

ip proxy-arp Command

Use the ip proxy-arp command to enable proxy ARP on an interface. The no
form of this command disables proxy ARP on an interface.
The syntax for this command is:
[no] ip proxy-arp
Example:
To disable proxy ARP on interface marketing:
Router-N(config-if:marketing)# no ip proxy-arp

ip routing-mode Command

Use the ip routing-mode command to set the IP routing mode of the interface.
In RT-MGMT mode, the interface functions as a routing interface. In
RT_PRIMARY_MGMT mode, the interface function as both a routing interface and
the primary management interface. The IP address used in CajunView is the
primary management interface IP address. Only one interface can be in
RT_PRIMARY_MGMT mode. If no interface is configured to
RT_PRIMARY_MGMT, the IP address used in CajunView is selected randomly.
The syntax for this command is:
[no] ip routing-mode <mode>
mode
Example:
Router-N>ip routing-mode RT_PRIMARY_MGMT

ip redirect Command

Use the ip redirect command to enable the sending of redirect messages on
the interface. The no form of this command disables the redirect messages. By
default, sending of redirect messages on the interface is enabled.
The syntax for this command is:
[no] ip redirect
Example:
Router-N>ip redirect
168
RT_MGMT or RT_PRIMARY_MGMT mode
Avaya P333R-LB User's Guide