Ip Proxy-Arp; Ip Redirect; Ip Rip Authentication Key - Avaya P460 Reference Manual

Chapter 2 Avaya P460 CLI Commands

ip proxy-arp

User level: read-write, admin.
You can only access this command in interface mode.
Type interface [name] at the command prompt to enter interface mode.
Use the ip proxy-arp command to enables proxy ARP on an interface.
Use the no ip proxy-arp command to disable proxy ARP on an interface.
The syntax for this command is:
[no] ip proxy-arp
Example:
To disable proxy ARP on interface marketing:
Router-1(config-if:marketing)#no ip proxy arp

ip redirect

User level: read-write, admin.
You can only access this command in interface mode.
Type interface [name] at the command prompt to enter interface mode if
necessary.
Use the ip redirect command to enables the sending of redirect messages on the
interface.
Use the no ip redirect command to disable the redirect messages. By default,
sending of redirect messages on the interface is enabled.
The syntax for this command is:
[no] ip redirect
Example:
Router-1(config-if:marketing)#ip redirect

ip rip authentication key

User level: read-write, admin.
You can only access this command in interface mode.
Type interface [name] at the command prompt to enter interface mode if
necessary.
Use the ip rip authentication key command to set the authentication
string used on the interface.
46 Avaya P460 Reference Guide