Chapter 10: 8010Co Chassis Air Filter Replacement; Task And Estimated Time - Avaya 8800 Maintenance Manual

Chapter 10: 8010co chassis air filter
This chapter describes the procedures to install or replace an air filter in the 8010co chassis of an Avaya
Ethernet Routing Switch 8800/8600.
To maintain proper operation of the 8010co chassis, you must periodically replace the air filter in the
chassis. How often you need to replace the air filter depends on the cleanliness at the installation site.
Contact Avaya for replacement air filters (part number 312194-A).
8010co chassis air filter replacement navigation
•

Task and estimated time

• 8010co chassis air filter installation procedures
• Air filter maintenance
Task and estimated time
The following table lists the estimated time to install an air filter in the 8010co chassis of the
Ethernet Routing Switch 8800/8600.
Removing the air bezel
Installing the air filter
Mounting the air bezel
Total time required
Important:
The installation procedure requires an extra screw and an estimated 3 additional minutes
depending on the type of the air bezel installed.
Routine Maintenance
replacement
on page 95
on page 102
Task
on page 96
Estimated time
2 minutes
1 minute
2 minutes
5 - 8 minutes
March 2011 95