Table of Contents
Advertisement
The syntax for this command is:
show internal buffering [<mod_num>]
mod_num
Example:
P330-N>show internal buffering 1
Module
------
1
show ip access-group
User level: privileged, supervisor.
Use the show ip access-group command to display the active policy-list
number.
This command applies to the P334T-ML only when it is in device mode
"Layer2".
The syntax for this command is:
show ip access-group <policy-list-number>
policy-
list-
number
Example:
P330-1(super)# show ip access group 1011
access-group 101
show ip access-list details
User level: user, privileged, supervisor
This command applies to the P334T-ML only when it is in device mode
"Layer2".
Use the show ip access-lists details command to view complete data of a
policy list (including DSCP and composite operation tables).
Avaya P330-ML Reference Guide
Switch number. If you do not specify a number then
the internal buffering for all switches in the stack will
be displayed.
Internal Buffer
---------------
med
A valid id number for a policy list currently defined for the module.
Chapter 2
Avaya P330-ML Layer 2 CLI Commands
139
Advertisement
Table of Contents
