Clear Ip Route; Clear Ip Route (Layer 3) - Avaya P460 Reference Manual

Chapter 2 Avaya P460 CLI Commands
The syntax for this command is:
clear interface [outband | inband]
outband
inband
Example:
P460-1# clear interface outband
Interface outband Cleared.
You must reset the device in order for the change to take
effect.

clear ip route

User level: read-write, admin.
Use the clear ip route command to delete IP routing table entries.
The syntax for this command is:
clear ip route <destination> <mask>
destination
mask
Example:
P460-1# clear ip route 134.12.3.0 255.255.255.0
Route deleted.

clear ip route (Layer 3)

User level: read-write, admin.
You can only access this command in configure mode.
Type configure at the command prompt to enter configure mode.
Use the clear ip route command to delete all the dynamic routing entries from the
Routing Table.
18
Clears the outband interface
Disables the inband interface
IP address of the network, or specific host to be added
IP address of the router
Avaya P460 Reference Guide