Show Autopartition Command; Show License Command - Avaya P333T User Manual

Designated
Root Priority
Designated
Root Cost
Designated
Root Port
Root Max Age
Hello Time
Bridge ID
MAC ADDR
Bridge ID
Priority
Port
State
Cost
Priority

Show autopartition Command

Use the show autopartition command to display the automatic partition.
The syntax for this command is:
show autopartition
Example:
Cajun_P330-N> show autopartition
Auto-partition is enabled.

Show license Command

Use the show license command to display a module license.
The syntax for this command is:
show license [module]
Avaya P333T User's Guide
Priority of the designated root bridge
Total path cost to reach the root
Port through which the root bridge can be reached (shown only
on nonroot bridges).
Amount of time a BPDU packet should be considered valid.
Number of times the root bridge sends BPDUs.
Bridge MAC address used in the sent BPDUs.
Bridge priority
Port number
Spanning-tree port state (disabled, inactive, not-connected,
blocking, listening, learning, forwarding, bridging, or type-
pvid-inconsistent).
Cost associated with the port.
Priority associated with the port.
Chapter 6 Cajun Campus CLI – Layer 2
59