License Commands; Multilayer Policy Licensing; Show License Command; Set License Command - Avaya P130 User Manual

License Commands

License commands allow you to show and set licenses for the P130 Switch family.

Multilayer Policy Licensing

Support for Multilayer Policy, which is on top of the basic P130 Layer 2 switch
features requires a license key for activation.
If no Multilayer Policy License Key was entered to the P130 switch, the Policy CLI
Commands will not be activated.

Show License Command

Use the show license command to display the License Key (if entered) and its
supported applications (SMON, Multilayer Policy).
The syntax for this command is:
show license [module]
module
Example:
P130-N> show license
Mod Application
--- -------------
1 smon
1 multilayerPolicy

Set License Command

Use the set license command to activate the Multilayer Policy or SMON
capability of the P130. See Enabling a Feature on page 26 for details.
The syntax for this command is:
set license <module> <license> <feature name>
<module>
<license>
<feature name>
Example:
P130-N> set license 1 021 1ad bad ca5 8d2 ccd multilayerPolicy
Avaya P130 User's Guide
Module number
License Key
--------------------
0000 0000 0000 0000 0000 0000
026 1c9 e21
P130 module number
License number
The name of the feature. The default is smon.
Chapter 6
State
-------
unlicensed
34f 8bb 3e8 licensed
Avaya P130 CLI
Feature Flag
----------
0
1
43