Show Intelligent-Multicast; Show Interface; Show Ip Access Lists - Avaya P460 Reference Manual

Chapter 2 Avaya P460 CLI Commands

show intelligent-multicast

User level: read-only, read-write, admin.
Use the show intelligent-multicast command to display the intelligent
multicast configuration.
The syntax for this command is:
show intelligent-multicast
Example:
P460-1> show intelligent-multicast
Intelligent-multicast configuration:
------------------------------------
intelligent-multicast state ---------------------- Disabled
Intelligent-multicast client-port-pruning time ---
Intelligent-multicast router-port-pruning time ---
intelligent-multicast group-filtering-delay time -

show interface

User level: read-only, read-write, admin.
Use the show interface command to display information on network interfaces.
The syntax for this command is:
show interface
Example:
P460-1> show interface
Interface Name
----------------
inband
ppp
outband

show ip access lists

User level: read-only, read-write, admin.
Use the show ip access lists command to display all the current policy lists.
130
Status VLAN
-------------- ----
disabled 1
disabled N/A
enabled N/A
IP address
--------------- ---------------
135.64.200.105 255.255.255.0
0.0.0.0 0.0.0.0
135.64.200.105 255.255.255.255
Avaya P460 Reference Guide
600[Sec]
1800[Sec]
10[Sec]
Netmask