Show Custom- Access-Type - Avaya P550R User Manual Addendum

show custom-
access-type
Part No. 610-0229-091
* Important: Avaya recommends that debug mode be enabled
only during troubleshooting sessions. If debug mode
is enabled during normal network operation, the
switch may display messages that users incorrectly
interpret as indications of system failures. For more
information on advanced troubleshooting, see
Chapter 17, "Monitoring the Avaya Multiservice
Switch," in the Avaya P550R, P580, P880, and P882
Multiservice Switch User Guide, Version 5.3.1.
By default, this mode is disabled.
Syntax: set debug {on | off}
Keyword, Argument,
or Option
on
off
Systems: Avaya P550R, P580, P880, and P882 Multiservice
switches.
Command Mode: User.
Description: Displays the custom access types that are currently
configured on the switch.
Syntax: show custom-access-type
Sample Output: The following example displays the custom access
types that are currently configured on a switch:
Avaya>show custom-access-type
Type Name
----------------
admin
CAT1
Definition
Enables debug mode.
Disables debug mode.
Sys Mod Event
Cfg. Port Mgmt.
Cfg.
---- ---- -----
- -
+ + +
- + -
January 7, 2003
Doc. No. 650-100-702
L2 Routing
Switching
--------- -------
+ +
+ -
9