Brocade Communications Systems WFT-2D User Manual page 307

San user manual
Table of Contents

Advertisement

TABLE 21
Fabric Ports report fields and components (Continued)
Field/Component
Port Status
Port State
Port Type
Physical/Logical Port
Switch Report
The Switch Report provides a information about the selected switch and ports.
Table 22
table functions, refer to
TABLE 22
Switch Report fields and components
Field/Component
Switch Details table
Name
WWN
IP Address
Model
State
Operational Status
Previous Operational Status
Vendor
Type
Firmware Version
AG Mode
Domain ID
Port Count
Occupied Port Count
Free Port Count
Unlicensed Port Count
Initiator Count
Target Count
Initiator/Target Count
Unreachable Time
Last Update Time
Switch Ports table
Brocade Network Advisor SAN User Manual
53-1003154-01
Description
The status of the port to which the AG is connected.
The state of the port to which the AG is connected.
The type of port the AG is connected to. Should typically be E-Port
Whether the port connected to the AG is Physical or Logical.
describes the fields and components of the Switch Report. For general report content and
"Report content and functions"
Description
The name of the switch.
The world wide name of the switch.
The IP address (IPv4 or IPv6 format) of the physical switch.
The model of the switch.
The state for the switch. For example, online or offline.
The operational status of the switch. For example, healthy, operational, degraded, marginal,
down, failed, unknown, or unreachable.
The previous operational status of the switch.
The vendor name.
Whether the device is virtual, physical, or NPIV.
The firmware version of the switch.
Whether or not the switch is running in AG mode.
The Domain ID for the switch in the format xx(yy), where xx is the normalized value and yy is
the actual value on the wire.
The number of ports on the switch.
The number of occupied ports on the switch.
The number of free ports on the switch.
The number of unlicensed ports on the switch.
The number of initiator ports on the switch.
The number of target ports on the switch.
The number of initiator and target ports on the switch.
The date and time the switch became unreachable.
The date and time when the information for the switch was last updated.
Reports
on page 261.
6
255

Advertisement

Table of Contents
loading

This manual is also suitable for:

Network advisor 12.3.0

Table of Contents