Brocade Communications Systems WFT-2D User Manual page 324

7
Dashboard overview
4. Click the Performance tab
5. Select the Display check box in the Performance Monitors list for each performance monitor
6. Click Add to add a new performance monitor. For more information, refer to
7.
8. Select one or more user-defined monitors and click Delete to delete the user-defined
9. Click OK to close the Customize Dashboard dialog box.
272
•
Title — The name of the status widget. For more information, refer to
page 281.
•
Description — A general description of the status widget.
The preconfigured performance monitors display. You can create up to 100 performance
monitors; however, you can only display up to 30 performance monitors. For more information
about performance monitors, refer to
FIGURE 114 Customize Dashboard dialog box, Performance tab
you want to add to the dashboard.
Clear the check box to remove the associated performance monitor from the dashboard.
The Performance Monitors list contains the following additional information:
•
Title — The name of the performance monitor. For more information, refer to
monitors" on page 297
•
Type — The type of monitor.
•
Measure — The performance measures included in the monitor.
•
Data Collectors — The data collectors that provide data for the monitor.
user-defined product performance monitor"
Click Edit to edit an existing performance monitor. For more information, refer to
user-defined product performance monitor"
performance monitor" on page 323.
performance monitors.
(Figure 114).
"Performance monitors"
on page 333.
on page 333 or
"Status widgets"
on page 297.
"Performance
"Configuring a
"Configuring a
"Editing a preconfigured
Brocade Network Advisor SAN User Manual
53-1003154-01
on