Brocade Communications Systems WFT-2D User Manual page 313

TABLE 25
Field/Component
Length Cu
Vendor Name
Vendor OUI
Vendor Part
Revision
Wavelength
Options
BR Max
BR Min
Serial #
Date Code
Temperature (c)
Bias Current (mA)
Tx Power (mW)
Rx Power (mW)
Voltage (V)
Alarm/Warning
Report content and functions
Each report contains the following information:
•
•
•
Depending on the report type, you can perform the following functions:
•
•
•
•
•
Brocade Network Advisor SAN User Manual
53-1003154-01
Adapters Faulty SFP report fields and components (Continued)
Description
The length of the copper cable (for distances greater than 1 meter, where optimum
performance is required).
The vendor of the extended link.
The vendor's organizational unique identifier (OUI).
The part number of the extended link.
The revision level of the extended link.
The wavelength translation, which enables longer reach through lower attenuation.
Displays details about the transceiver; for example, the type of port connector, type of
transceiver, and enable/disable status.
The upper bit rate limit at which the SFP transceiver meets its specifications.
The lower bit rate limit at which the SFP transceiver meets it specifications.
The serial number of the SFP transceiver.
The date the SFP was manufactured transceiver.
The port temperature, measured in Celsius.
The low-level DC current (the Bias Current), measured in mA.
The transmitted power, measured in mW.
The received power, measured in mW.
The voltage; for example, 1.8V, 3.3V, or 5.0V.
Indicates whether an alarm has been triggered.
The name of the report displayed at the top of the report.
The date and time the report was generated.
The report data, presented in a tabular format.
Sort a table by clicking a column head. Click a column head again to reverse the sort order.
Launch a more detailed report by clicking a link within the report.
Navigate through the report using a table of contents (TOC), by clicking the TOC icon in the
Report toolbar.
Export report data to a CSV, PDF, or XLS file by clicking the Export Data icon in the toolbar (refer
to "Downloading a generated report"
page 262).
Navigate through the report by using the following icons in the Report toolbar.
on page 237 or "Exporting data from the report"
6
Reports
on
261