User Guidelines
This command has no user guidelines.
Example
The following example displays the current LLDP configuration summary.
console# show lldp
Global Configurations:
Transmit Interval: 30 seconds
Transmit TTL Value: 120 seconds
Reinit Delay: 2 seconds
Notification Interval: limited to every 5 seconds
console#show lldp
LLDP transmit and receive disabled on all interfaces
show lldp interface
Use the show lldp interface command in Privileged EXEC mode to display
the current LLDP interface state.
Syntax
show lldp interface {gigabitethernet unit/slot/port | tengigabitethernet
unit/slot/port | fortygigabitethernet unit/slot/port| all}
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Examples
This example show how the information is displayed when you use the
command with the all parameter.
console#show lldp interface all
Interface Link Transmit Receive
Notify
TLVs
Mgmt
563
LLDP Commands