Security Configuration Command Set
Configuring TACACS+
14.3.4 Configuring TACACS+
Purpose
To perform the following:
•
Review the TACACS+ client and server configurations on the device.
•
Enable or disable the TACACS+ client.
•
Set local and remote login options.
•
Set server parameters, including IP address, timeout period, server port, and secret.
•
Reset TACACS+ client and server settings to default values.
Commands
The commands used to review and configure TACACS+ are listed below and described in the
associated section as shown:
•
show tacacs
(Section
•
set tacacs
(Section
•
show tacacs server
•
set tacacs server
•
clear tacacs server
•
show tacacs session
•
set tacacs session
•
clear tacacs session
•
show tacacs command
•
set tacacs command
•
show tacacs singleconnect
•
set tacacs singleconnect
14-24 Matrix DFE-Platinum and Diamond Series Configuration Guide
14.3.4.1)
14.3.4.2)
(Section
14.3.4.3)
(Section
14.3.4.4)
(Section
14.3.4.5)
(Section
14.3.4.6)
(Section
14.3.4.7)
(Section
14.3.4.8)
(Section
14.3.4.9)
(Section
14.3.4.10)
(Section
14.3.4.11)
(Section
14.3.4.12)