Set Tacacs Session - Enterasys Matrix 2G4072-52 Configuration Manual

Security Configuration Command Set
Configuring TACACS+
14.3.4.7

set tacacs session

Use this command to enable or disable TACACS+ session accounting, or to configure TACACS+
session authorization parameters. For simplicity, separate syntax formats are shown for configuring
session accounting and session authorization.
set tacacs session accounting {enable | disable}
set tacacs session authorization {service name | read-only attribute value |
read-write attribute value | super-user attribute value}
Syntax Description
accounting
enable | disable
authorization
service name
read-only
attribute value
read-write
attribute value
super-user
attribute value
14-32 Matrix DFE-Platinum and Diamond Series Configuration Guide
Specifies that TACACS+ session accounting is being
configured.
Enables or disables TACACS+ session accounting.
Specifies that TACACS+ session authorization is being
configured.
Specifies the name of the service that the TACACS+ client
will request from the TACACS+ server. The name
specified here must match the name of a service configured
on the server.
Specifies that the Matrix read-only access privilege level
should be matched to a privilege level configured on the
TACACS+ server by means of an attribute-value pair
specified by attribute and value.
By default, attribute is "priv-lvl" and value is 0.
Specifies that the Matrix read-write access privilege level
should be matched to a privilege level configured on the
TACACS+ server by means of an attribute-value pair
specified by attribute and value.
By default, attribute is "priv-lvl" and value is 1.
Specifies that the Matrix super-user access privilege level
should be matched to a privilege level configured on the
TACACS+ server by means of an attribute-value pair
specified by attribute and value.
By default, attribute is "priv-lvl" and value is 15.