Konica Minolta bizhub C658 Service Manual page 1231

bizhub C658/C558/C458/C368/C308/C258
8.2.2 Exiting procedure
1. Touch [Exit].
2. Turn OFF the main power switch. Wait 10 seconds, then turn ON the main power switch again.
8.3 Billing Setting
8.3.1 Counter Setting
(1) Use
• To set the counting method for the total counter, size counter and banner paper counter.
• To set the size regarded as the large size (2 counts.)
• Use to change the counting method for the counters.
(2) Default setting (Total Counter Mode)
• Japan: Mode 1
• US, Europe, Others 1, Others 2, Others 3, Others 4, Others 5: Mode 2
(3) Setting item (Total Counter Mode)
• Mode 1: 1 count per copy cycle
• Mode 2: Large size is double counts
NOTE
▪ The content of this setting is reflected in the count method with the key counter.
(4) Default setting (Large Size Counter Mode)
• US: A3 and 11 x 17
• Europe, Others 1, Others 2, Others 3, Others 4, Others 5: A3, B4, 11 x 17, and 8 1/2 x 14
• Japan: No Count
(5) Setting item (Large Size Counter Mode)
A3/11 x 17
1
A3/B4/11 x 17/8 / x 14
2
1
A3/11 x 17/B4/8 / x 14/Foolscap
2
• No Count
• A3/11 × 17
1
• A3/B4/11 × 17/8 / × 14
2
1
• A3/11 × 17/B4/8 / × 14/Foolscap
2
NOTE
▪ When the "Large Size Counter Mode" is set to "No Count", the machine operate with following conditions regardless of the
each control panel settings.
▪ Total Counter: Mode1
▪ Banner Paper Counter Mode: Mode1
▪ Banner Counter Double Count Mode: OFF
When it exceeds 279 mm in the main scan direction and 420 mm in the sub scan direction
(exceeds 399 mm at fax scan), it is regarded as the large size.
When it exceeds 215 mm in the main scan direction and 355 mm in the sub scan direction
(exceeds 337 mm at fax scan), it is regarded as the large size.
When it exceeds 203 mm in the main scan direction and 330 mm in the sub scan direction
(exceeds 313 mm at fax scan), it is regarded as the large size. (However the size in the main scan
direction changes according to the foolscap size setting.)
I-461
I ADJUSTMENT/SETTING > 8. BILLING SETTING