Agilent Technologies 6890 Series Service Manual page 844

Modular input/output (MIO) components (6890A and 6890 Plus)
INET components
Description
1. INET MIO card assy
2. MIO support bracket
3. MIO connector assy
4. Support bracket standoff, M3 male/female
5. Screw, Torx T-10, M3 × 6 mm
6. Screw, Torx T-20, M4 × 12 mm
7. 5 Meter HP-IL cable (not shown)
8. INET cover plate
LAN components
Description
1A. LAN card assy (J2552B)
2. MIO support bracket
3. MIO connector assy
4. Support bracket standoff, M3 male/female
5. Screw, Torx T-10, M3 × 6 mm
6. Screw, Torx T-20, M4 × 12 mm
7A. 8 Meter thin LAN cable (not shown)
8. Loopback connector (not shown)
9. Replacement LAN card (not shown)
10. LAN cable, black crossover PC to 1 GC (not for use on hub)
(Not shown)
The JetDirect cards (LAN card assy), part no. J2552-69013, were modified to add
additional capabilities in early 1998. New cards should have the new firmware;
older cards should not be used. For a first-time installation into a 6890 GC,
purchase G2335A to receive all necessary mounting hardware and GC firmware.
The G1530A option #500 is the factory-installed version.
Jun 2001
Modular input/output (MIO) components (6890A and 6890 Plus)
Illustrated Parts Breakdown
Agilent 6890 Gas Chromatograph Service Manual
Electrical
Part no. Qty.
G1553-60015 1
G1530-00320 1
G1553-60100 1
G1530-20570 1
0515-0680 1
0515-2496 3
82167-60003 1
G1530-00610 1
Part no. Qty.
J2552-69013 1
G1550-00320 1
G1553-60100 1
G1530-20570 1
0515-0680 1
0515-2496 3
92227-60004 1
92227Q 1
J2552-69013 –
5183-4649
1360
9 of 16