Agilent Technologies 6890 Series Service Manual page 742

Split/splitless inlet column liners
The table below lists some of the liners available for the split/splitless column.
Refer to the Agilent chemical analysis consumables and accessories catalog
for a complete list of liners and the specifications for each.
Description
Single-taper liner with glass wool packing, deactivated
(recommended)
Single-taper liner without glass wool packing,
deactivated
Split/Splitless liner
Split liner, deactivated (recommended)
Split/splitless inlet EPC pneumatic module
(Part no. G1544-60500, 0 to 100 psig or G1544-60540, 0 to 150 psig)
Description
1. Male connectors 1/8-inch Swagelok
2. Screw, M4 x 45 mm, Torx T-20
3. Inlet supply fitting
4. Screw, M3 x 12 mm, Torx T-10
5. O-rings, under connectors and fitting (12/pkg)
6. Split vent On/Off valve
For diagram of screw and O-ring placement in pneumatic modules see
Figure 1310-7 on page 15 of this section.
Jun 2001
Split/splitless inlet column liners
Illustrated Parts Breakdown
Agilent 6890 Gas Chromatograph Service Manual
Inlets
Part no. Qty.
5062-3587 1
5181-3316 1
19251-60540 1
5183-4647 1
Part no. Qty.
G1543-80030 2
0515-2484 1
G1543-20610 1
0515-1084 2
5180-4182 1
G1544-60580 1
1310
5 of 36