Agilent Technologies 6890 Series Service Manual page 748

Capillary injection port (0 to 30 psig)
Description
1. SCR-Mach M4 × 0.7 × 8 mm LG
2. SCR-Mach M4 × 12 mm, T-20 Torx
3. Thread cutting screw
Capillary injection port subassembly (0 to 30 psig)
(Part no. G1544-65500)
Description
1. O-ring.239-inch
2. SCR-M4 × 8 T-20 Torx-chrm plt
3. Reducing nut
4. Column nut
5. Gold plated seal
6. Septum nut assembly
7. Vent torque plate
8. Purge regulator
9. Insert assembly series II
10. Washer, flat SS
11. 11-mm Solsept
12. Ferrule, no hole
13. Cap top insulation
14. Flow controller inlet fitting-replacement
15. Cap inlet block insulation
16. Cap bottom insulation
17. Cap heated block
18. Cap thread insert
19. Cap thermal nut
20. S/S Solenoid cable assembly
21. Cap solenoid valve
22. Cap inj. heater/sensor assembly
23. Cap shell weldment
NS Replacement flow controller O-ring kit
See also the parts list for the Split/Splitless Inlet with EPC.
Jun 2001
Capillary injection port (0 to 30 psig)
(Order no. 5180-4182 12/pkg)
(Order no. 5182-0739)
Illustrated Parts Breakdown
Agilent 6890 Gas Chromatograph Service Manual
Inlets
Part no. Qty.
0515-0106 2
1390-1023 3
0624-0665 2
Part no. Qty.
0905-1014 1
0515-2711 2
18740-20800 1
5181-8830 2/pk
18740-20885 1
18740-60835 1
19244-00030 1
19246-60530 1
19251-60575 1
5061-5869 12/pk
50/pkg
5181-7458 1
G1544-00010 1
0100-1595 1
G1544-00020 1
G1544-00030 1
G1544-20570 1
G1544-20580 1
G1544-20590 1
G1544-60520 1
G1544-60560 1
G1544-61140 1
G1544-80570 1
0905-1251 –
1310
11 of 36