420
Oven and Temperature Control
Replacing the oven flap motor
Shroud
Motor
Figure 420-10
4.
Remove the two Torx T-10 screws securing the motor and flapper
assembly to the bracket and remove the motor/flappers from the bracket.
5.
Remove the Torx T-20 screw at the bottom of the flapper shaft near the
flap motor and disconnect the motor from the flappers.
6.
Reassembly is the reverse of removal.
18 of 20
Removing the flapper assembly
Mainframe
Agilent 6890 Gas Chromatograph Service Manual
Flappers
Jun 2001