Agilent Technologies 6890 Series Service Manual page 641

Gas chromatograph

Hide thumbs Also See for 6890 Series:

Table of Contents

Installing the valve box

Insert the valve(s) into the appropriate hole(s) in the heater block and

secure each valve with two long Torx T-10 screws.

Figure 1120-5

Plumb the valves in the appropriate configuration. A variety of valve

configurations are diagrammed in the Typical Valve Configurations

section in this chapter.

Orient all of the valves in the OFF (CCW) position.

Installing valves

Agilent 6890 Gas Chromatograph Service Manual

Troubleshooting

6890a 6890 plus